Exterior Finishing: Metal Lath

The most rigid of all expanded metal lath products

A High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet. These ribs provide the superior strength…

Galvanized, Expanded Steel Plaster aND Stucco Base

A superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone reinforcement. Applications include…

A Heavy-gauge lath for Enhanced protection from breach

Diamond Security Lath is an expanded steel base used for interior and exterior plaster and stucco reinforcement for secured applications where advanced breech protection is required.

heavy duty Reinforcing

Mega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.

Galvanized Expanded Steel Plaster/Stucco Base

A superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB) metal lath is used behind stone,…

1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco Base

A self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as required per ASTM C847, ASTM C1780, ASTM…

1/4" self-furring v-groove Expanded Steel Plaster or Stucco Base

Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the length of the sheet. The V’s allow…

more rigid than diamond lath and helps to prevent Plaster loss

3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep longitudinal solid steel ribs spaced at 3-7/8"…

when the ultimate corrosion resistance is required

When the highest levels of corrosion resistance are required, a stainless steel substrate for Portland cement or gypsum plaster used in stucco & stone reinforcement is mandated for…

when the ultimate Self-Furring corrosion resistance is required

Stainless Steel Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed "V" ribs, spaced 6" on center along the length of the sheet. The V’…

Reinforcement for corners, windows, doors and openings

Striplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is flexible for use over irregular surfaces.

Stucco Reinforcing

Structa Wire lath is a welded wire lath, engineered to enhance the performance of stucco cladding and is a part of the ClarkDietrich Easy Embedment System.

Superior Stucco Reinforcing

Structalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.

wall & ceilings Reinforcing

V Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.